Board Siding
parameters:
sheet_width:
Width of the rendered sheet (inches)
sheet_height:
Height of the rendered sheet (inches)
boardwidth:
Width of the individual boards (inches)
boardthickness:
Thickness of the individual boards (inches)
notch:
Depth of V-notch between the boards, percent of board thickness. 0=no notch, 1=notch all the way through
wallthickness:
Thickness of the wall (inches). Puts a flat backing on the wall.
modeling_scale:
The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
printing_scale:
Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
filename:
Enter a name to use for your .stl file, minus the .stl extension.
default.stl:
Home