Clapboard
parameters:
sheet_width:
Width of the rendered sheet (inches)
sheet_height:
Height of the rendered sheet (inches)
boardwidth:
Width of the individual boards (inches)
boardthickness:
Thickness of the individual boards (inches)
pitch:
Pitch (slant) of the boards (degrees)
peak:
If a peak is required for a roof, enter the rise (above sheet height) in inches. Default: 0, no rise.
wallthickness:
Thickness of the wall (inches). Puts a flat backing on the wall.
modeling_scale:
The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
printing_scale:
Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
filename:
Enter a name to use for your .stl file, minus the .stl extension.
default.stl:
Home