Double-Hung Window
parameters:
opening_width:
Width of the wall opening into which the window will be inserted
opening_height:
Height of the wall opening into which the window will be inserted
window_depth:
Overall depth of the window
board_width:
Width of the boards used to make the window frame
board_thickness:
Thickness of the boards used to make the window frame and sashes
sash_muntin_width:
Width of the muntins, the frame pieces that make up the sash
sash_depth:
Depth of the sash frames
upper_sash_layout_rows:
Number of rows of panes in the upper sash
upper_sash_layout_columns:
Number of columns of panes in the upper sash
lower_sash_layout_rows:
Number of rows of panes in the lower sash
lower_sash_layout_columns:
Number of columns of panes in the lower sash
upper_sash_offset:
Use this to change the depth of the upper sash
lower_sash_offset:
Use this to change the depth of the lower sash
cavitycube:
Set to 1 to generate a "cavity cube", a cube the dimensions of the window. Use this to subtract a hole from a wall where the window will be mounted.
modeling_scale:
The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
printing_scale:
Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
filename:
Enter a name to use for your .stl file, minus the .stl extension.
default.stl:
Home