Half-round Window
parameters:
diameter:
Window diameter
framewidth:
Width of the frame components
numbermuntins:
Number of muntins
muntinwidth:
Width of the muntins
window_opening_cutout:
window opening cutout:
window_opening_scale:
If window_opening_cutout is set to 1, window_opening_scale will multiply the width and height by the supplied number to accommodate expansion/shrinkage in the printed part. Default:1.04 for Elegoo Mars 3 and Elegoo plant-based resin, so do a test for your printer/resin
modeling_scale:
The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
printing_scale:
Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
filename:
Enter a name to use for your .stl file, minus the .stl extension.
default.stl:
Home