roofline_length: | | Roofline length (need to include overhang x 2)
|
rise: | | Rise of the roof (from ceiling)
|
run: | | Run of the roof (building width / 2)
|
overhang: | | Overhang added to the rise/run-computed width
|
shingle_thickness: | | Shingle thickness
|
shingle_gap: | | Shingle gap
|
shingle_slant: | | Shingle slant. Don't go over 3
|
roof_thickness: | | Additional thickness of the roof
|
modeling_scale: | | The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
|
printing_scale: | | Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
|
filename: | | Enter a name to use for your .stl file, minus the .stl extension. |