Freight Door
parameters:
opening_width:
Width of the wall opening into which the door will be inserted
opening_height:
Height of the wall opening into which the door will be inserted
transom_height:
Height of the transom, subtracted from the opening height
transomwindow_quantity:
Number of transom windows
board_width:
Width of the boards used to make the door frame
board_thickness:
Thickness of the boards used to make the door frame
doorinset:
How deep is the door in the frame
rotation:
The angle of the door planks
inset:
Use this to print the window with/without the spacing to allow inserting a printed window into a separate wall
modeling_scale:
The modeling scale of the .stl file. Specifies the denominator of the scale, e.g., 1/87 for HO scale, the default. Assumes the dimensions specified in the previous parameters are prototype, e.g. 1:1.
printing_scale:
Scales the model for printing. Default is 25.4, the multiplier to convert decimal inches to millimeters.
filename:
Enter a name to use for your .stl file, minus the .stl extension.
default.stl:
Home